Angiography Injector

System specifications:

1000 VA 50-60HZ 100-240 VAC
Capable of connecting Heat Maintainer to stabilize the contrast temperature at the right temperature and ease of injection
With injection rate from 0.1 to 45 ml / s with an increase rate of 0.1 ml / s at steady state
And injection rate of 1 to 10 ml / s with increasing rate of 0.1 ml / s in variable mode using hand controller
It has a volume of 1 to 150 ml with an increase rate of 1 ml
Has the ability to adjust the injection pressure limit from 100 to 1200 psi with an increase rate of 1 psi
Has a Rise Time from 0 to 9.9 seconds in increments of 0.1 ml
Has a Delay Time from 0 to 99.9 seconds in increments of 0.1 ml
Has a syringe filling speed of 1 to 20 ml / s in increments of 1 ml / s
Has a syringe filling volume of 1 to 150 ml / s in increments of 1 ml / s
Scan Delay or Inject Delay – from zero to 300 seconds
Capable of storing 40 protocols
Ability to display information of injections performed up to the last 50 injections
Ability to program up to 4 injection phases
Can be installed as Pedestal (Integrated or Freestanding), Table Mount Ceiling,
It has Single and Multi injection modes
Usable syringe volume cc150